7.24.2011

Scrapbuster DIY headband tutorial

These headbands would be great for a beginner {or expert} seamstress. They are really quick {I finished these three in about 30 minutes} and use materials you likely already have in your craft stash.


Needed materials (per headband):


Scrap fabric, approx 3" x 12" (2)


Fusible interfacing 3"x 12" (1)


1/2 in elastic, about 6" (might need to adjust for your head size)


basic sewing supplies


Cut out fabric (taper towards the edges so it's approx the same width as your elastic). Layer pieces as shown. **Note that the fabric pieces are right side together and the fusible interfacing is on the outside. Stitch around 3 edges, making a tube. Flip right side out (use a pencil to help push it through)


When the tube is right side out, iron flat. The fusible interfacing will help it stay smooth and also provide a little extra structure.
Top stitch around all sides. When stitching around short ends, add in elastic. Back stitch a couple of times to reinforce the stitch.
I chose to make mine reversible, but you could do the same on both sides if you want.
For the braided headband, I just cut a few strips of 45" fabric about 1" wide then braided them. I wanted it to have a frayed look, but if you want it clean, sew wider strips into tubes, then flip right side out and braid. I cut two pieces of the long braid about 12", then secured to elastic.The finished products! I like the versatility of this project: unlimited fabrics/ribbon to choose from, reversible, however wide you want it. Sewing customized projects is a great perk of knowing basic sewing skills.

I'm linking this project to:
Making the World Cuter, The DIY Show Off, Skip to My Lou, Today's Creative Blog, Fireflies and Jellybeans, Beyond the Picket Fence, Tatertots and Jello, Kojo Designs

No comments:

Post a Comment